Honeywell Sensepoint XCD Explosion-Proof Transmitters Flammable toxic oxygen gas detector
Sensepoint XCD is easy to use. The sensor simply plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.
A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.
All detectors are supplied pre-configured and include two programmable alarm relays, one programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and MODBUS communication. The scale, range, relay operation, alarm set point and electronic tag number of the detector can be adjusted using the transmitter's LCD and non-intrusive magnetic switches. Outputs are automatically inhibited during adjustment, thereby reducing the risk of false alarm at the control panel during maintenance.
Additional Features and Benefits:
All-In-One Gas Monitoring Solution
- Flammable (catalytic or infrared), toxic and oxygen versions available
- Serves new/retrofit, indoor/outdoor applications
- Stainless steel or aluminum explosion-proof housing options
- IP66 as standard
Proven and Reliable Sensor Technology
- SurecellTM electrochemical sensors
- Poison immune infrared sensors
- Poison resistant catalytic bead sensors
- Long life sensors
Global Approvals
- US and Latin America, European, Canadian and Asian
- Compliant with UL, INMETRO, ATEX, IECEx, CSA, KTL, PA, GB and CCCF standards
Easy to Use
- User friendly and intuitive tri-color backlit display with digits, bar graph and icons
- Fully configurable via magnetic switches
- Optional remote sensor mounting
- Selectable sink or source 4-20mA output
- Auto-inhibit during maintenance
- MODBUS communications for remote diagnostics/configuration
Cost Effective
- Common transmitter platform
- Minimal training required
- Reduced spares
- Non-intrusive, one-man operation
- Plug-in sensor replacement
- MODBUS multi drop option offers cabling savings
Simple Installation
- Plug-in display module removes to give access to terminal area
- Integral mounting bracket
- 2 x M20 or ¾” NPT cable/conduit entries
- Removable plug/socket type terminal blocks for
- Sink/source switch to suit preferred wiring topology
- Integral mounting plate attaches to surface, horizontal or vertical piping
ATEX/IECEX/CHINA Approval (LM25) & Part Number
ATEX/IECEx/KTL/PA and GB approved SP XCD flammable CAT 0-100% LEL (20 to 100% LEL, 10% LEL) with LM25, M20 entry & SPXCDALMFX
ATEX/IECEx/KTL/PA and GB approved SP XCD methane (CH4) IR 0-100% LEL (20,0 to 100.0% LEL, 10% LEL) with LM25, M20 entry & SPXCDALMRX
ATEX/IECEx/KTL/PA and GB approved SP XCD flammable propane (CH4), ethylene (C2H4), butane (C4H10) and pentane (C5H12); IR 0-100% LEL (20 to 100% LEL, 10% LEL) with LM25, M20 entry & SPXCDALMPX
ATEX/IECEx/KTL/PA and GB approved SP XCD carbon dioxide (CO2) IR 0-2% v/v with LM25, M20 entry & SPXCDALMB1
ATEX/IECEx/KTL/PA and GB approved SP XCD oxygen (O2) 25.0% v/v with LM25, M20 entry & SPXCDALMO1
ATEX/IECEx/KTL/PA and GB approved SP XCD hydrogen sulfide (H2S) 0-50 ppm (10.0 to 100.0 ppm) with LM25, M20 entry & SPXCDALMHX
ATEX/IECEx/KTL/PA and GB approved SP XCD carbon monoxide (CO) 0-300 ppm (100 to 1000 ppm) with LM25, M20 entry & SPXCDALMCX
ATEX/IECEx/KTL/PA and GB approved SP XCD hydrogen (H2) 0-1000 ppm with LM25, M20 entry & SPXCDALMG1
ATEX/IECEx/KTL/PA and GB approved SP XCD nitrogen dioxide (NO2) 0-10 ppm (10 to 50 ppm, 5 ppm) with LM25, M20 entry & SPXCDALMNX
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-2%VOL with LM25,M20 Entry & SPXCDALMB1
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-5%VOL with LM25,M20 Entry & SPXCDALMB2
